Skip to content Skip to sidebar Skip to footer

Toro Push Mower Oil Change: A Simple Guide to Keeping Your Mower Running Smoothly


Regular maintenance is key to the longevity and performance of your Toro push mower. One of the most important tasks you can do yourself is changing the engine oil. This simple procedure ensures your mower's engine stays lubricated, cool, and efficient, preventing costly repairs down the line. In this guide, we'll walk you through the steps of changing the oil in your Toro push mower.

Why Change Your Mower's Oil?

Just like car engines, lawn mower engines rely on oil to lubricate moving parts, reduce friction, and prevent overheating. Over time, the oil breaks down, becomes dirty, and loses its effectiveness. Regular oil changes help:

  • Extend Engine Life: Clean oil prevents excessive wear and tear on engine components.
  • Maintain Performance: Proper lubrication ensures the engine runs smoothly and efficiently.
  • Prevent Overheating: Fresh oil helps dissipate heat, preventing damage caused by high temperatures.

What You'll Need:

  • Fresh Oil: Consult your Toro owner's manual for the recommended oil type and quantity. SAE 30 is a common choice for most mowers.
  • Oil Drain Pan or Container: To collect the old oil.
  • Wrench or Socket Set: For removing the drain plug (if applicable).
  • Funnel: For adding new oil.
  • Rags or Paper Towels: For cleanup.
  • Optional: Oil extraction pump (if your mower doesn't have a drain plug).

Steps to Change Your Toro Mower Oil:

  1. Prepare Your Mower: Make sure the engine is cool to avoid burns. Disconnect the spark plug wire for safety.
  2. Locate the Drain Plug (or Fill Hole): If your mower has a drain plug, it's usually located under the mower deck near the engine. If not, you'll need to use an oil extraction pump through the oil fill hole (refer to your manual for location).
  3. Drain the Oil:
    • With Drain Plug: Place the drain pan under the plug and carefully remove it with a wrench. Let the oil drain completely.
    • Without Drain Plug: Insert the extraction pump tube into the oil fill hole and pump out the old oil.
  4. Replace the Drain Plug (if applicable): Clean the drain plug and its threads, then reinsert it and tighten securely.
  5. Add New Oil: Use a funnel to pour the correct amount of fresh oil into the oil fill hole. Refer to your manual for the exact capacity.
  6. Check the Oil Level: With the mower level, remove the dipstick, wipe it clean, reinsert it, and then remove it again. The oil level should be within the indicated range on the dipstick.
  7. Reconnect the Spark Plug Wire: Ensure the spark plug wire is securely connected.
  8. Dispose of Old Oil: Take the used oil to a recycling center or auto parts store that accepts used motor oil.


  • Change Frequency: Change your mower oil at least once a year or every 25 hours of use, whichever comes first.
  • Warm Engine: Running the engine for a few minutes before draining can help the oil flow more easily.
  • Level Surface: Make sure the mower is on a level surface when checking and adding oil.

Important Note: Always consult your Toro owner's manual for specific instructions and safety precautions relevant to your mower model.


By following these steps and regularly changing the oil in your Toro push mower, you'll ensure its optimal performance and prolong its lifespan. If you have any doubts or questions, don't hesitate to consult your owner's manual or seek assistance from a qualified technician.

Feel free to suggest any modifications or additional information you'd like included!

Post a Comment for "Toro Push Mower Oil Change: A Simple Guide to Keeping Your Mower Running Smoothly"