Skip to content Skip to sidebar Skip to footer

How To Change Oil Craftsman Push Mower

Craftsman 37460 21" 140cc Push Mower with High Rear Wheels | Lawn mower

Looking to keep your Craftsman push mower running smoothly? Changing the oil is a crucial maintenance task that can help prolong the life of your machine and ensure optimal performance. While it may seem daunting at first, with the right guidance and tools, you can easily master this task and save on costly repairs down the line. In this guide, we'll walk you through the steps to change the oil in your Craftsman push mower, so you can keep your lawn looking pristine and your mower in top condition.

First things first, before you begin the oil change process, make sure you have all the necessary supplies on hand. You will need fresh oil suitable for small engines, a drain pan, a socket wrench or adjustable wrench, and some rags or paper towels to clean up any spills. Additionally, it's a good idea to consult your owner's manual for specific instructions on the type and amount of oil needed for your particular model of Craftsman push mower.

Now that you have everything you need, here are the steps to change the oil in your Craftsman push mower:

  1. Locate the oil drain plug underneath the mower deck. This plug is typically located near the base of the engine and can be removed with a socket wrench or adjustable wrench.
  2. Place the drain pan underneath the oil drain plug to catch the old oil when you remove the plug.
  3. Slowly unscrew the drain plug and allow the old oil to drain completely into the pan. Be careful not to spill any oil on the mower or the ground to avoid environmental contamination.
  4. Once all the old oil has drained out, replace the drain plug and tighten it securely with the wrench.
  5. Locate the oil fill tube on the top of the engine and remove the dipstick. Using a funnel, carefully pour in the recommended amount of fresh oil for your mower. Be sure not to overfill the engine, as this can lead to performance issues.
  6. Replace the dipstick and wipe away any excess oil that may have spilled during the filling process.
  7. Start your Craftsman push mower and let it run for a few minutes to circulate the new oil throughout the engine.
  8. Check the oil level using the dipstick to ensure it is at the correct level. Add more oil if necessary, but be careful not to overfill.
  9. Dispose of the old oil properly by taking it to a recycling center or hazardous waste disposal facility in your area. Do not pour it down the drain or onto the ground.

And there you have it! By following these simple steps, you can easily change the oil in your Craftsman push mower and keep it running smoothly for years to come. Regular oil changes are essential for maintaining the health of your mower's engine and can help prevent costly repairs down the line. So take the time to perform this maintenance task regularly, and enjoy a beautifully landscaped lawn with the help of your trusty Craftsman push mower.

Post a Comment for "How To Change Oil Craftsman Push Mower"